2026.08 SLG2 • SLG4 SERIES SLG2-300 SLG2-400 SLG2-500 SLG2-600 SLG2-800 SLG2-1000 SLG2-1200 Slide Area (LR x FB) Bolster Area (LR x FB) FB UD kN 3000 4000 5000 6000 8000 10000 12000 SPM kg MPa 4000 0.6 4500 0.6 3000 0.6 5000 0.6 5500 0.6 6000 0.6 7000 0.6 kW P Type** kN 550 600 800 1000 1200*** 1500 2000 Capacity Strokes per Minute Max. Upper Die Weight* Cushion Pad Area (LR x FB) 5000 6000 8000 10000 12000 7000 0.6 8000 0.6 9000 0.6 9000 0.6 10000 0.6 800 1000 1200* 1500 2000 850 850 850 850 850 37×4 37×4 45×4 45×4 45×4 55×4 55×4 55×4 55×4 55×4 75×4 55×4 75×4 75×4 90×4 90×4 90×4 110×4 90×4 90×4 110×4 SLG2-1600 16000 9000 0.6 2400 110×4 132×4 55×4 55×4 55×4 55×4 55×4 75×4 75×4 75×4 90×4 90×4 90×4 110×4 90×4 90×4 110×4 * For SLG4-800-1, only 1000kN die cushion is available. 3500×1500 3800×1500 4100×1500 3700×1800 4000×1800 4300×1800 4600×1800 3700×1800 4000×1800 4300×1800 4600×1800 1800×700 1800×700 2200×900 110×4 cylinder** cylinder** 2900×1300 3200×1300 3500×1300 3800×1300 cylinder** cylinder** 2600×1300 2900×1300 3200×1300 3500×1300 2300×1300 2600×1300 2900×1300 3200×1300 * Upper die weight may vary in table size. Please contact your sales representative for more information. ** For selecting 120T, 150T and 200T air cylinder die cushions, bolster area in FB should be at least 1700mm. For selecting 240T,300T air cylinder die cushions, bolster area in FB should be at least 1900mm. *** For SLG2-800-1, only 1000kN die cushion is available. ※Slide and Bolster area up to 5500x1550 by request. ※This speci cation is subject to change without notice. ※ For special requirements, please contact your local supplier.
RkJQdWJsaXNoZXIy ODM5NzM=