2026.08 SAG2 • SAG4 SERIES SAG2-300 SAG2-400 SAG2-500 SAG2-600 SAG2-800 SAG2-1000 SAG2-1200 SPM 3000 kN 4000 5000 6000 8000 10000 12000 kW P kN 550 600 800 1000 1200*** 1500 2000 4000 0.6 4500 0.6 3000 0.6 5000 0.6 5500 0.6 6000 0.6 7000 0.6 kg MPa Slide Area (LR x FB) Capacity Strokes per Minute Bolster Area (LR x FB) Max. Upper Die Weight* FB UD * Upper die weight may vary in table size. Please contact your sales representative for more information. ** For selecting 120T, 150T and 200T air cylinder die cushions, bolster area in FB should be at least 1700mm. For selecting 240T,300T air cylinder die cushions, bolster area in FB should be at least 1900mm. *** For SAG2-800-1, only 1000kN die cushion is available. ※Slide and Bolster area up to 5500x1550 by request. ※This speci cation is subject to change without notice. ※ For special requirements, please contact your local supplier. * For SAG4-800-1, only 1000kN die cushion is available. Type** 5000 8000 10000 12000 850 850 850 850 1200* 1500 2000 7000 0.6 9000 0.6 9000 0.6 10000 0.6 6000 850 8000 0.6 Cushion Pad Area (LR x FB) 37×4 37×4 45×4 45×4 45×4 55×4 55×4 55×4 55×4 55×4 75×4 55×4 75×4 75×4 90×4 90×4 90×4 110×4 90×4 90×4 110×4 55×4 800 55×4 55×4 55×4 1000 55×4 75×4 75×4 75×4 90×4 90×4 90×4 110×4 90×4 90×4 110×4 cylinder** cylinder** cylinder** 2300×1300 2600×1300 2900×1300 3200×1300 2600×1300 2900×1300 3200×1300 3500×1300 2900×1300 3200×1300 3500×1300 3800×1300 SAG2-1600 16000 2400 9000 0.6 110×4 110×4 132×4 cylinder** 3500×1500 3800×1500 4100×1500 3700×1800 4000×1800 4300×1800 4600×1800 3700×1800 4000×1800 4300×1800 4600×1800 1800×700 1800×700 2200×900
RkJQdWJsaXNoZXIy ODM5NzM=