Air_screwdriver

9 ADDN48 10mm(3/8") ADDN58 10mm(3/8") ADDN458 13mm(1/2") <Standard Body> ADDN26 6mm(1/4") <Small Body> -Light Weight- SH-0005 ADDN39 10mm(3/8") <Small Body> -Light Weight- m Max. Torque Hard Joint Avg. Air Consumption Model No. Drive Bolt Capacity (mm) N-m Ft-lb No Load Speed (r.p.m.) Dimension (Ø x L x H) (mm) cfm Weight (g) Noise Level (±3dB(A)) Min. Air Hose Bore (I.D.) ADPN45 F1/4” 3 ~ 6 7.0 5.0 750 36 x 146 x 142 10 0.28 550 72 5mm ADPN48 F1/4” 3 ~ 6 7.0 5.0 1700 45 x 159 x 154 19 0.55 780 76 8mm ADPN58 F1/4” 3 ~ 7 13.0 9.6 750 45 x 159 x 154 19 0.55 780 76 8mm ADPN39 F1/4” 3 ~ 5 5.0 3.7 1600 36 x 140 x 142 10 0.28 550 72 5mm Drilling Cap Avg. Air Consumption Model No. mm inch Bolt Capacity (mm) Ft-lb N-m No Load Speed (r.p.m.) cfm Weight (g) Min. Air Hose Bore (I.D.) ADDN48 10 3/8 3 ~ 6 7.0 1700 45 x159 x 150 19 0.55 970 76 8mm ADDN58 10 3/8 3 ~ 6 13.0 750 45 x159 x 150 19 0.55 970 76 8mm ADDN458 13 1/2 3 ~ 6 13.0 750 45 x159 x 150 19 0.55 1060 76 8mm ADDN26 6 1/4 3 ~ 5 3.5 2.6 2900 36 x140 x 142 10 0.28 630 72 5mm ADDN39 10 3/8 3 ~ 5 5.0 1600 36 x140 x 142 10 0.28 630 72 5mm Air Inlet could be 3 way option (optional) ( ti l) Air Inlet could be 3 way option (optional) ( ti l) ADPN39 <Small Body> -Light Weight- ADPN45 <Small Body> -Light Weight- ADPN48 ADPN58 <Standard Body> *Side handle for ADDN458 type 3.7 5.0 9.6 9.6 * With “N” : Trigger start only. * W/O “N” (ADP39) : Two way operations. (One is trigger locked up with pin and works by push-down; the other works by trigger-on & push-down together.) (Without Clutch) Trigger Start Air Screwdriver Direct Driven Type (Without Clutch) Trigger Start Air Drill Direct Driven Type m³/min ³/min Dimension (Ø x L x H) (mm) Noise Level (±3dB(A)) Max. Torque Hard Joint