95 DIVIDING EQUIPMENT The division are easily and quickly set by simply turning the Selector Pins through half a turnwith a Screwdriver. • Do not move the Lever until the Divider has been fitted on the machine table. The Lever can only be operated once the unit is clamped firmly on themachine. • Always return the Lever to the clamped position after eachmovement to prevent jamming. • Do not force the Lever if it jams throughmis-operation, simply turn the Selector Pin to the passing position in order to free the Lever. • Do not commence machining until the plunger has stopped the Table from rotating and the Lever has been returned to the clamped position. • Set the divisions by turning the required Selector Pins through half a turnwith a ScrewDriver. • Moving the Lever clockwise will unclamp the Table and rotate it to the next selected division. • The Tablewill be stopped at the division by the plunger. • The Table is clamped when the Lever is returned to it’s original position. IMPORTANT: For repeated operation, make sure the Lever is always turned back to the starting point after each dividing operation. Only one hand is required to unclamp, index and clamp the Table due to the unique ‘HOMGE’ design. Lever action is light and quick. CAUTION OPERATION EASY SELECTIONOFDIVIDINGPOSITIONS ONE ACTIONPOSITIONING
RkJQdWJsaXNoZXIy ODM5NzM=