90 VISES H W L SPECIFICATIONS ( Material: FCD 55 Ductile lron ) Unit: mm Model L W H JawPlateHeight JawPlateWidth JawOpening Weight (kg) HDV-100 277 140 83 43 100 95 6.6 HDV-130 316 175 83 43 130 105 8.2 ANGLELOCKDRILLPRESSVISE Model: HDV-100, 130 • ANGLE LOCK MECHANISM produces downward pressure on Jaw during clamping, ensuring that both Jaws are parallel and work is held accurately. • Built of high tensile (FCD 55) Ductile Iron . • Slideways and underside of vise are precision grounded. • The Stepped Jaw Plates are hardened to HRC 50º and precision grounded. LOCK IIMACHINEVISE Model: HMC-6” This is the "Just Right" vise for use on all your tape controlled machine tools. What the vise doesn’t have is a coolant through. This enables you to anchor a series of these vises snuggle sideby-side on the machine bed. A number of similar parts can be clamped and machined at the same time, with minimum centerto-center machining distance. Up goes your production rate; down goes costs. Both sides are precision ground square to bottom and parallel with each other and so the vise can also be used at vertical position with its vise bed perfectly perpendicular to themachine table. • Can be placed side-by-side on your N/C equipment. • Permits fast accuratemultiplemachining. • Sides ground. • ACCURACY Both sides square to bottom to 0.01mmand parallel with each other to 0.02mm (All others same as HAV-6” Vise.) • Keyways on bottom to steady jawplate. SPECIFICATIONS ( Material: FCD 55 Ductile lron ) Unit: mm Model A B C a b c1 d e f Weight (kg) HMC-6" 156 44 146 370 18 119 75 19 438 32
RkJQdWJsaXNoZXIy ODM5NzM=