102 DIVIDING EQUIPMENT SPECIFICATIONS Model A B C D E F G HCM-2 245 921/23 335 133 /16 152 6 166 617/32 198 725 /32 50 115 /16 52 21/16 Model H h J K L Weight (kg) HCM-2 143 55 /8 285 117/32 194 75 /8 465 185 /16 265 107/16 132 SUPERIORUNIVERSAL DIVIDINGHEAD Model: HCM-2 • The Universal Dividing Head can be used for Simple Dividing and also for producing worms, by changing gears and gear quadrant. A particular feature of the HOMGE design is the 55.5mm through bore and MT6 taper. Furthermore, the unit can also be tilted from0 to 90 degrees. • The Spindle, Worm and Gear are made of a high grade steel, hardened and ground for high accuracy and durability. • The Tail Stock is designed with a dovetail construction for high rigidity and can be adjusted in each direction to achieve the correct alignment. • The Worm and Gear provide a reduction ratio of 40:1 and the unit is suppliedwith a double sidedDividing Plate. • Providing divisions on face A of 24, 25, 28, 30, 34, 37, 39, 41, 42 & 43 and on face B of 46, 47, 49, 51, 53, 54, 57, 58, 59, 62 & 66. • The Change Gears supplied are 24, 28, 32, 38, 40, 44, 48, 56, 64, 72, 86 & 100 Teeth. Thus, a verywide and comprehensive range of indexing is achievable. • Each Universal Dividing Head is supplied complete with center, carrier, change gear quadrant, set of change gears, Tail Stock andDividing Plate. OPTIONAL ACCESSORY: • 7” 3-JawChuck Center Height of Tail Stock Max. 165mm Min. 38mm
RkJQdWJsaXNoZXIy ODM5NzM=