2018_HOMGE_English_eCatalog

97 DIVIDING EQUIPMENT TAIL STOCK for UNIVERSAL DIVIDINGHEADBS-2 Unit: mm / inch Model A1 a1 b1 g1 H1 CenterHeight(h2) BS-2 194 7 41/64 177 6 62/64 125 4 59/64 16 5/8 147 5 50/64 Max. 138 Min. 115 SPECIFICATIONS Unit: mm / inch Model A B H h a b g Taperofcenter Weight(kg) BS-2 365 14 13/32 272 10 45/64 236 9 19/64 132.7 5 15/64 213 8 25/64 134 5 9/32 16 5/8 B&S No.10 63 STANDARDACCESSORIES: DIVIDING PLATE A, B, C. NUMBER OF HOLES OF DIVIDING PLATE (WORMGEAR REDUCTION RATIO 40:1) Number of holes Plate A 15 16 17 18 19 20 Plate B 21 23 27 29 31 33 Plate C 37 39 41 43 47 49 UNIVERSALDIVIDINGHEAD Model: BS-2 The HOMGE’S Universal Dividing Head is designed for all types of gear cutting. Precision dividing and spiral dividing ( except Type BS-0, and BS-1 ) work with greater precision and efficiency than has been possible before. The center face can be tilted from a horizontal position of 90º down to -10º from vertical, and inclinations can be read off a scale graduated in degrees. The center is built to the highest engineering standards and is factory inspected and tested to ensure complete satisfaction.The ratio of worm to gear is 40:1. REMARK: “ Operation and Service Manual “ is included for reference OPTIONAL ACCESSORY: • 3-JawChuck • 6” or 7” 3-JawChuck for BS-2