B644 • 長度單位 Unit of Length (mm) AID PIS 鐵屑清除器 PIS CHIP BLOWER 特點Feature 注意事項Notice 鐵屑清除器作動原理是利用機械主軸迴轉帶動扇葉展開，產生強力氣流， 配合適當的路徑，對工作台上的切屑與切削液進行清除，相較傳統的氣 槍清理方式，降低人員操作，環境的汙損，提高生產效能。 起動轉速 500R.P.M 後提高至 2,000R.P.M，扇葉展開後再提高至轉速 7,000~10,000R.P.M。 使用時，因扇葉展開高度與直徑的變化，須距離工件至少 100MM，並 避免夾治具干涉。 使用時避免切屑與切削液飛濺，機台設備需完全緊閉，且鐵屑清除器須 處於完全靜止的狀態下才能重新開啟。 本產品扇葉為耗材，多次的開合使用或不正常適用造成碰撞，均會造成 扇葉的損耗，如發現缺損時，則不能繼續使用，避免扇葉斷裂造成損失。 7,000~10,000R.P.M。 Startup spindle speed: From 500R.P.M to 2,000R.P.M. Then, increased the speed (7,000R.P.M.~10,000R.P.M.) after the fan blades are deployed. Due to the changes in the unfolded height and diameter of the fan blades, the distance from the surface of workpieces must be at least 100mm to avoid the interference from fixture. Avoid splashing of chips and cutting fluid during use. The machine door must be completely closed. Before attempting to reopen the chip blower, it must be fully stationary first. Fan blades of chip blower are consumable. Collisions caused by multiple opening and closing or abnormal application will cause the loss of the fan blade. If a defect is found, it cannot be used continuously to avoid damage. - - - - The operating principle of the chip blower is to use the rotation of mechanical spindle to drive the fan blades to expand, generate a strong air flow, and cooperate with the appropriate path to remove the chips and cutting fluid on the machine platform. Compared with the traditional air gun cleaning method, it reduces the operation from personnel and environmental pollution and also improve production efficiency. 規格 Spec. 建議轉速 Recommend Rotation Speed 轉向 Directionof Rotation 扇葉展開尺寸 Opening Size of Fan Blade 扇葉與 工件距離 Distance to Workpieces Surface 建議路徑 移動速度 Recommend Movement Feed 夾持柄徑 Shank Diameter 重量 (KGS) Weight PIS-200 Min 7,000~ Max 10,000 r.p.m 順時針 Clockwise Rotation ≒ 195mm 100~150mm 1,000~12,000 16mm 0.12kg 500rpm 2000rpm 4000rpm 7000rpm NEW 使用前Before 使用後After ▍範例 Example Ø16 40 95
RkJQdWJsaXNoZXIy ODM5NzM=