DIN 69893-A B494 • 長度單位 Unit of Length (mm) HSK HSK/MLK 強力銑削夾頭 HSK/MLK FORCE COLLET CHUCK 規格 Spec. l1 d1 d2 重量(KGS) Weight HSK63AxMLK12-90 90 12 42 - HSK63AxMLK16-100 100 16 48 - HSK63AxMLK20-120 120 20 56.5 - HSK63AxMLK25-105 105 25 60 - HSK63AxMLK32-120 120 32 72 2.53 HSK63AxMLK32-150 150 32 72 - HSK100AxMLK12-115 115 12 42 - HSK100AxMLK16-120 120 16 48 - HSK100AxMLK20-120 120 20 56.5 - HSK100AxMLK25-115 115 25 60 - HSK100AxMLK32-120 120 32 72 4.36 HSK/MLD 直式筒夾銑床夾頭 HSK/MLD MULTI-LOCK COLLET CHUCK ※ 注意 : 銑刀裝置入筒夾需超過筒夾有效挾持長度，以避免因非完全挾持，導致筒夾損壞、變形 Note: To avoid the improper clamping ( no clamp at all) & damage and deformation for collet, it should exceed the effective length of collet when installing the cutter onto collet. 規格 Spec. l1 d1 d2 重量(KGS) Weight HSK50AxMLD20-120 120 20 56.5 1.62 HSK50AxMLD32-130 130 32 71 1.80 HSK63AxMLD20-120 120 20 56.5 2.07 HSK63AxMLD32-120 120 32 71 2.54 HSK100AxMLD20-120 120 20 56.5 3.40 HSK100AxMLD32-120 120 31 71 4.00 NO.M430337 DIN 69893 DIN 69893-A -Run-out: Within 0.001~0.005mm. Concentricity: 0.02mm. -Dynamic pre-balancing G6.3 at 8000rpm., with an inspection report. The balancing grade and revolution can be done according to customer request but the additional charge is needed. - MLD20 and MLD-3/4 、MLK20 spanner can be used in common. - MLD25 and EOC25 、MLK25 spanner can be used in common. - MLD32 and MLD-1-1/4 、MLK32 spanner can be used in common. - 偏擺精度 :0.001~0.005 以內， 真圓度 :0.02mm - 預設動平衡至 G6.3 8000rpm，可依照客戶指定動平衡等級及轉速， 並附檢驗報告，但需另外付費 - MLD20、MLD-3/4、MLK20 扳手共用 - MLD25、EOC25、MLK25 扳手共用 - MLD32、MLD-1-1/4、MLK32 扳手共用 l1 d1 d2 l1 d1 d2 筒夾Collet 扳手Spanner 給水管Coolant Supply Unti B631 B651 B519 ▍特點 Feature ▍選配表 Option 防塵設計Dust-proof design
RkJQdWJsaXNoZXIy ODM5NzM=