JIS MAS 403 B6339 B433 • 長度單位 Unit of Length (mm) BT BT/SPH 強力型直結式鑽頭刀桿 BT/SPH DRILL CHUCK HOLDER INTEGRATED TYPE D - 能增加鑽夾頭的堅固性及精準性，於使用綜合加工中心機的換刀系統 - 刀柄和鑽夾頭結合為一體。即使是作重切削的加工，鑽夾頭也不會脫落 - 即使機器主軸立即停止，刀具也不會因此脫落 - 超過長時間的使用，此夾頭仍保持高精度 -Designed to maximize drill chuck rigidity and precision on machine centers with automatic tool changer. -The shank and Universal Drill Chuck are combined as one body, so that the Drill Chuck will not be fallen out when heavy cutting is being performed. -The drill will not be dropped out when the main spindle of machine instantly stops. -High precision can be maintained over a long period of time. 規格 Spec. l1 l2 D d1 d2 夾持範圍 Clamping Range R 重量 (KGS) Weight mm inch BT30 x SPH08-80 83 55 46 38 6 1~8 1/24~5/16 0.04 2.20 BT30 x SPH13-100 102 80 46 50 8 1~13 1/24~1/2 0.04 2.50 BT40 x SPH08-85 87 55 63 38 6 1~8 1/24~5/16 0.04 2.40 BT40 x SPH13-105 102 80 63 50 8 1~13 1/24~1/2 0.04 2.18 BT40 x SPH16-110 119 80 63 57 10 3~16 1/8~5/8 0.04 3.00 BT50 x SPH13-115 115 80 100 50 8 1~13 1/24~1/2 0.04 4.88 BT50 x SPH16-120 120 80 100 57 10 3~16 1/8~5/8 0.04 6.00 本產品之最大優點為簡單容易操作、快速方便、安全性極高，當使用本產品時，為了減少意外事故發生，延長產品壽命，必須遵守以下列舉的基 本事項 : 夾持長度 (l1) 應將鑽頭柄插入到底或至少爪長 (L) 的 2/3。 The most advantage for this product is easy to operate, item saving and high safety. Please abide by following to avoid the accidents & extend the product life when in use. The shank of drill (clamping length L1) should be inserted into the bottom fully. Or at least 2/3 length of L 以下為各種規格爪長度及夾持量 Following table is the specification for clamping length & volume 規格 Spec. 夾爪長度 L(mm) 夾持量 L1(mm) 至少 3mm (1/8") 14 9 6.5mm (1/4") 20 13 8mm (5/16") 26 17 10mm (3/8") 26 17 13mm (1/2") 28 19 16mm (5/8") 30 20 拉頭Pull Stud B645-B647 ▍特點 Feature ▍注意事項 Notice ▍選配表 Option - 附扳手Attaches the spanner.
RkJQdWJsaXNoZXIy ODM5NzM=