JIS MAS 403 B418 • 長度單位 Unit of Length (mm) BT BT/EOC 立銑刀夾頭 BT/EOC COLLET CHUCK l1 l2 - 筒夾樣式有 OZ 型以及 B 型 - 整支通孔，利於出水及抗震 - 如需擋刀螺絲可另外指定 - 裝置時筒夾必須先置入螺帽，再裝入刀具，接著鎖固入本體 - 刀具置入筒夾內孔，必須超出筒夾內孔有效夾持長度，避免不當鎖固， 造成損壞 - 務必使用正確扳手來裝置不可任意改變，避免不當鎖固，造成損壞 -Compatible with OZ and B type collets. -Through coolant design increase the tool life and vibration resistance. -A special stop screw is available for purchase to prevent the tool from being inserted too deep. -Place the collet first into the clamping nut, then install both on to the chuck. -Install the cutting tool to its proper length before tightening the clamping nut to avoid damaging the tool. -Do not use other spanners, it might cause damage the nut during tightening 規格 Spec. l1 l2 d1 T 夾持範圍 Clamping Range 重量 (KGS) Weight BT30 x EOC25-70 70 48 60 M12x1.75P Ø3~Ø25 0.88 BT40 x EOC25-70 70 40.5 60 M16x2.0P Ø3~Ø25 1.78 BT40 x EOC25-100 100 70.5 60 M16x2.0P Ø3~Ø25 2.25 BT40 x EOC25-120 120 88 60 M16x2.0P Ø3~Ø25 1.83 BT40 x EOC32-90 90 63 72 M20x2.0P Ø4~Ø32 2.00 BT40 x EOC32-105 105 78 72 M20x2.0P Ø4~Ø32 2.20 BT40 x EOC32-120 120 93 72 M20x2.0P Ø4~Ø32 2.60 BT50 x EOC25-85 85 44.5 60 M16x2.0P Ø3~Ø25 4.40 BT50 x EOC25-100 100 59.5 60 M16x2.0P Ø3~Ø25 4.76 BT50 x EOC25-120 120 77 60 M16x2.0P Ø3~Ø25 5.20 BT50 x EOC32-90 90 44 72 M24x2.0P Ø4~Ø32 4.63 BT50 x EOC32-105 105 59 72 M24x2.0P Ø4~Ø32 4.85 BT50 x EOC32-120 120 74 72 M24x2.0P Ø4~Ø32 5.35 拉頭Pull Stud 筒夾Collet 螺帽Nut 扳手Spanner B645-B647 B633 B640 B653 PAT.NO:M298033 PAT.NO:M311791 PAT.NO:3128766 PAT.NO:20-0433603 DIN-ISO-10897 PAT.NO:ZL200620132661.0 PAT.NO:696550 PAT.NO:TR200702942Y PAT.NO:0000266731 ▍特點 Feature ▍選配表 Option
RkJQdWJsaXNoZXIy ODM5NzM=