Feature High Speed Drill TSD VARIETY OF HOLE TYPES MACHINING TSD多孔類型加工 交叉孔 Cross Hole 半邊孔 Half Hole 凹面孔 Concave Face 斜面孔 Oblique Face 套孔 Target Drills 擴孔 Enlarge Hole 可用於粗加工除料或不規則表面鑽孔，無需預加工小孔，但表面傾斜角度 不超過6度 在進刀和退刀時，降低進給率30%~50% 正確的使用切削液的壓力值，有助於鐵屑的排出，及降低刀具振動， 和提高刀具壽命 層板堆疊加工時，間隙應小於0.2mm 板材有變形及彎曲時，仍可進行加工作業 Tips Drilling irregular surface slope angle must be within 6° with no spot drill needed. Reduce 30% to 50% feed speed during engage and retract. Correctly adjust the exact pressures of coolant can provide you stable operation and extended cutter life. Gap b/w layers must be within 0.2mmwhen drilling stacking layer. Available for drilling irregular or bending plates. 注意事項
RkJQdWJsaXNoZXIy ODM5NzM=