JIS MAS 403 A085 BT - 開槽 - 此款刀桿內孔分割 6 槽以防止滑動並加大夾持力 - 另有套裝可選購 - MLD20、MLD-3/4、MLK20 扳手共用 - MLD25、EOC25、MLK25 扳手共用 - MLD32、MLD-1-1/4、MLK32 扳手共用 - SLITTING - In that case end mill shank or collet have oil or chips, divide the slitting into six in order to prevent slipping and to grip exactly. - Available in a set. - MLD20 and MLD-3/4 、MLK20 spanner can be used in common. - MLD25 and EOC25 、MLK25 spanner can be used in common. - MLD32 and MLD-1-1/4 、MLK32 spanner can be used in common. T T d1 l1 l1 d2 d1 d2 Fig.1 Fig.2 l2 l2 拉頭Pull Stud 筒夾Collet 扳手Spanner 止水螺帽SealedCap A290-A293 A277 A299 A288 規格 Spec. l1 d1 d2 T FIg. 重量 (KGS) Weight BT50 × MLD12-105 105 12 42 M12×1.75P 1 4.60 BT50 × MLD12-135 135 12 42 M12×1.75P 1 5.10 BT50 × MLD12-165 165 12 42 M12×1.75P 1 5.80 BT50 × MLD16-105 105 16 48 M12×1.75P 1 4.90 BT50 × MLD16-135 135 16 48 M12×1.75P 1 5.60 BT50 × MLD16-165 165 16 48 M12×1.75P 1 6.50 BT50 × MLD20-105 105 20 56.5 M16×2.0P 1 4.50 BT50 × MLD20-150 150 20 56.5 M16×2.0P 1 4.90 BT50 × MLD25-100 100 25 60 M16×2.0P 1 4.80 BT50 × MLD25-130 130 25 60 M16×2.0P 1 5.70 BT50 × MLD32-105 105 32 71 M24×3.0P 1 5.00 BT50 × MLD32-135 135 32 71 M24×3.0P 1 5.20 BT50 × MLD32-165 165 32 71 M24×3.0P 1 6.70 BT50 × MLD42-115 115 42 90 M24×3.0P 1 5.50 BT50 × MLD42-130 130 42 90 M24×3.0P 1 6.50 BT50 × MLD42-165 165 42 90 M24×3.0P 1 7.70 BT/MLD 直式筒夾銑床夾頭 BT/MLDMULTI-LOCKMILLING CHUCK - 附扳手 Attaches the spanner. ※ 注意 : 銑刀裝置入筒夾需超過筒夾有效挾持長度，以避免因非完全挾持，導致筒夾損壞、變形 Note: To avoid the improper clamping ( no clamp at all) & damage and deformation for collect, it should exceed the effective length of collet when installing the cutter onto collet. PAT.NO:M447277 PAT.NO:M430337 PAT.NO:M451185 PAT.NO:ZL201220749784.4 PAT.NO:ZL201220749942.6 ▍特點 Feature ▍選配表 Option
RkJQdWJsaXNoZXIy ODM5NzM=