JIS MAS 403 A084 BT - 開槽 - 此款刀桿內孔分割 6 槽以防止滑動並加大夾持力 - 另有套裝可選購 - MLD20、MLD-3/4、MLK20 扳手共用 - MLD25、EOC25、MLK25 扳手共用 - MLD32、MLD-1-1/4、MLK32 扳手共用 - SLITTING - In that case end mill shank or collet have oil or chips, divide the slitting into six in order to prevent slipping and to grip exactly. - Available in a set. - MLD20 and MLD-3/4 、MLK20 spanner can be used in common. - MLD25 and EOC25 、MLK25 spanner can be used in common. - MLD32 and MLD-1-1/4 、MLK32 spanner can be used in common. - 附扳手Attaches the spanner. BT/MLD 直式筒夾銑床夾頭 BT/MLDMULTI-LOCKMILLING CHUCK T T d1 l1 l1 d2 d1 d2 Fig.1 Fig.2 l2 l2 規格 Spec. l1 d1 d2 T Fig. 重量 (KGS) Weight BT30 × MLD12-80 80 12 42 M12×1.75P 2 1.00 BT30 × MLD16-75 75 16 48 M12×1.75P 1 1.20 BT30 × MLD20-80 80 20 56.5 M12×1.75P 2 1.90 BT30 × MLD20-90 90 20 56.5 M16×2.0P 2 2.10 BT30 × MLD25-90 90 25 60 M16×2.0P 2 1.34 BT40 × MLD12-75 75 12 42 M12×1.75P 1 2.10 BT40 × MLD12-105 105 12 42 M12×1.75P 1 2.10 BT40 × MLD12-135 135 12 42 M12×1.75P 1 2.20 BT40 × MLD16-75 75 16 48 M12×1.75P 1 2.20 BT40 × MLD16-105 105 16 48 M12×1.75P 1 2.30 BT40 × MLD16-135 135 16 48 M12×1.75P 1 2.30 BT40 × MLD20-80 80 20 56.5 M16×2.0P 1 2.30 BT40 × MLD20-100 100 20 56.5 M16×2.0P 1 2.50 BT40 × MLD20-135 135 20 56.5 M16×2.0P 1 2.40 BT40 × MLD25-85 85 25 60 M16×2.0P 1 2.40 BT40 × MLD25-100 100 25 60 M16×2.0P 1 2.40 BT40 × MLD32-95 95 32 71 M16×2.0P 2 2.70 BT40 × MLD32-105 105 32 71 M16×2.0P 2 2.70 BT40 × MLD32-135 135 32 71 M16×2.0P 2 3.00 拉頭Pull Stud 筒夾Collet 扳手Spanner 止水端蓋SealedCap A290-A293 A277 A299 A288 ※ 注意 : 銑刀裝置入筒夾需超過筒夾有效挾持長度，以避免因非完全挾持，導致筒夾損壞、變形 Note: To avoid the improper clamping ( no clamp at all) & damage and deformation for collect, it should exceed the effective length of collet when installing the cutter onto collet. PAT.NO:M447277 PAT.NO:M430337 PAT.NO:M451185 PAT.NO:ZL201220749784.4 PAT.NO:ZL201220749942.6 ▍特點 Feature ▍選配表 Option
RkJQdWJsaXNoZXIy ODM5NzM=