空壓源8kg/cm2之低壓源，即可達4000kgf之超高挾持力，而挾持力從0-4000kgf可藉由調壓器自由 調整設定，適合銅鋁類產品輕加工或鑄鐵類初胚重切削。 Only need 8kg/cm2 of low air pressure source can reach the super high griping force of 4000kgf. The griping force can be adjusted within 0-4000kgf by the pressure regulator. Suitable for light processing of copper and aluminum products or heavy duty cutting of cast iron. 當不慎操作失去空壓源時，安全保壓設計不會失壓且有自動補壓及穩壓之功能，夾持力永不鬆脫以 確保挾持工件之功能，需再將空壓源送入方可打開。 When the air pressure source is inadvertently operated, the safety pressure maintaining design will not lose pressure and has the function of automatic voltage compensation and voltage regulation. The clamping force will never be loose to ensure the function of holding the workpiece, and the air pressure source needs to be sent again. The party can be opened. 虎鉗本體材質使用石墨鑄鐵(FCD-60)，滑軌經高週波熱處理HRC45ﾟ以上，可保持高耐磨性。 The body of the Vise using high quality graphite casting iron (FCD-60). Slideway has high frequence heat treatment at HRC45ﾟor more to keep the accuracy and its long use life. 內藏下壓結構可產生下鎖之力，可消除虎口板上浮和工作傾斜。 (一般由上方螺絲鎖住滑動塊虎鉗，沒有下壓力量) The built-in pressing structure can generate a locking force, which can eliminate the floating of vise jaw and operational slope. (The sliding block vise is locked by the upper screw, there is no downforce). Features 特點 自動化量產 由於空壓技術及雙夾緊特性，使虎鉗非 常適合自動化批量生產。 The air pressure technology and double clamping characteristics make the vise very suitable for automated mass production. 雙夾機構 夾持安全距離可達5mm，按下開關後，雙夾機構同 時夾持兩個大小誤差5mm以內之工件。 注意事項：不可單邊夾持。 The clamping safety distance can reach 5mm. After pressing the switch, the double clamping mechanism simultaneously holds two workpieces with a size error of less than 5mm. Note: Can not be unilaterally clamped. ! !
RkJQdWJsaXNoZXIy ODM5NzM=