A280 ACCESSORIES PAT.NO: 185237 PAT.NO: 185237 DIN 6499 PAT.NO: 185237 PAT.NO: 185237 DIN 6499 PAT.NO: 3102050 PAT.NO: 185237 DIN-ISO-15488 PAT.NO: 3102050 PAT.NO: 185237 DIN-ISO-15488 ER 包固得螺帽 POWER GOOD ER CLAMPING NUT ER 包固得螺帽 POWER GOOD ER CLAMPING NUT 規格 Spec. L D T 重量 (KGS) Weight ER8-M 10.8 12 M10×0.75P 0.005 ER11-M 11.3 16 M13×0.75P 0.01 ER16-M 18 22 M19×1.0P 0.05 ER20-M 19 28 M24×1.0P 0.05 ER25-M 20 35 M30×1.0P 0.08 規格 Spec. L D T 重量 (KGS) Weight ER11-A 11.3 19 M14×0.75P 0.02 ER16-A 18.5 28 M22×1.5P 0.05 ER20-A 20 34 M25×1.5P 0.10 - 螺帽採標準平衡 G6.3 Nut balanced G6.3 standards adopted. - 螺帽採標準平衡 G6.3 Nut balanced G6.3 standards adopted. - 已預設平衡、適於 R.P.M10000 使用，專利在案 - 拴緊作業請使用 ER-A 扳手，不可任意改變扳手長度，以免造成人為 因素損壞 - Pre-balances. Suitable for 10000rpm.Has a patent. - Fasten jobs please use ER-A wrench, can not be arbitrarily changed Variable length wrench to avoid damage to human factors. - 材質 : SNCM-415 - 硬度 HRC52° - 螺紋及 30°斜度一次成型加工，確保精度、螺紋公差為一級牙 4H - 使用時，應先將筒夾置入螺帽，再一併置入本體 - Steel:SNCM-415 - HRC52° - The thread and 30° taper are finished processing one time. The precision and the tolerance of thread 4H. - When using, please put the collet into the nut and then put the them into the body together. ▍特點 Feature - 外徑較標準螺紋小，適於閃避或是避免干涉的場合不使用 - M 型螺帽的螺紋和 A 型不一樣，本體不能共用 - 已預設平衡、適於 R.P.M10000 使用，專利在案 - Many machines' spindles are manufactured by ER-M's size. - ER-M clamping nut is specially processed for small bore.It's external diammer and thread are smaller than ER-A - Pre-balances. Suitable for 10000rpm.Has a patent. - 材質 : SNCM-220 - 硬度 HRC52° - 螺紋及 30°斜度一次成型加工，確保精度、螺紋公差為一級牙 4H - 使用時，應先將筒夾置入螺帽，再一併置入本體 - Steel:SNCM-220 - HRC52° - The thread and 30° taper are finished processing one time. The precision and the tolerance of thread 4H. - When using, please put the collet into the nut and then put the them into the body together. ▍特點 Feature
RkJQdWJsaXNoZXIy ODM5NzM=