DIN 69893-A A156 HSK HSK/MLK 強力銑削夾頭 HSK/MLK FORCE COLLET CHUCK 規格 Spec. l1 d1 d2 重量 (KGS) Weight HSK63A × MLK32-120 120 32 72 2.53 HSK100A × MLK32-120 120 32 72 4.36 HSK/MLD直式筒夾銑床夾頭 HSK/MLDMULTI-LOCKMILLING CHUCK(STRAIGHT COLLET) ※ 注意 : 銑刀裝置入筒夾需超過筒夾有效挾持長度，以避免因非完全挾持，導致筒夾損壞、變形 Note: To avoid the improper clamping ( no clamp at all) & damage and deformation for collect, it should exceed the effective length of collet when installing the cutter onto collet. 規格 Spec. l1 d1 d2 重量 (KGS) Weight HSK50A × MLD20 - 120 120 20 56.5 1.62 HSK50A × MLD32 - 130 130 32 71 1.80 HSK63A × MLD20 - 120 120 20 56.5 2.07 HSK63A × MLD32 - 120 120 32 71 2.54 HSK100A × MLD20 - 120 120 20 56.5 3.40 HSK100A × MLD32 - 120 120 31 71 4.00 NO.M430337 DIN 69893 DIN 69893-A -Run-out: Within 0.001~0.005mm. Concentricity: 0.02mm. -Dynamic balancing G6.3 at 8000rpm., with aninspection report. The balancing grade and revolution canbe done according to customer request but the additional charge is needed. - MLD20 and MLD-3/4 、MLK20 spanner can be used in common. - MLD25 and EOC25 、MLK25 spanner can be used in common. - MLD32 and MLD-1-1/4 、MLK32 spanner can be used in common. - 偏擺精度 :0.001~0.005 以內，真圓度 :0.02mm - 預設動平衡至 G6.3 8000rpm，可依照客戶指定動平衡等級及轉速， 並附檢驗報告，但需另外付費 - MLD20、MLD-3/4、MLK20 扳手共用 - MLD25、EOC25、MLK25 扳手共用 - MLD32、MLD-1-1/4、MLK32 扳手共用 l1 d1 d2 l1 d1 d2 筒夾Collet 扳手Spanner 給水管Coolant Supply Unti A277 A299 A176 ▍特點 Feature ▍選配表 Option 防塵設計Dust-proof design
RkJQdWJsaXNoZXIy ODM5NzM=