DIN 2080 A148 NT NT/ER 銑床夾頭柄 NT/ER COLLET HOLDER Fig.1 Fig.2 T d1 t1 l2 l1 D - At the end of body, there's a plastic ring protecting the spindle form damage. - Please informDRAWBAR's size when purchasing holder. - NT 本體後端有塑膠套環設計，有效的保護機器主軸避免碰傷 - 訂購前請先確認本體拉桿牙數為公制或英制 規格 Spec. l1 l2 d1 t1 T Fig. 重量 (KGS) Weight NT30 × ER16A - 45 45 8 28 M10 × 1.5P M12 × 1.75P 或 1/2” ×W12 1 0.50 NT30 × ER20A - 45 45 8 34 M12 × 1.75P 1 0.60 NT30 × ER25 - 55 55 8 42 M16 × 2.0P 1 0.65 NT30 × ER32 - 60 60 8 50 M16 × 2.0P 1 0.80 NT30 × ER40 - 75 75 8 63 M16 × 2.0P 1 0.90 NT40 × ER16A - 45 45 10 28 M10 × 1.5P M16 × 2.0P 或 5/8” ×W11 1 0.95 NT40 × ER20A - 45 45 10 34 M12 × 1.75P 1 0.88 NT40 × ER25 - 55 55 10 42 M16 × 2.0P 1 1.25 NT40 × ER32 - 60 60 10 50 M16 × 2.0P 1 1.09 NT40 × ER40 - 70 70 10 63 M20 × 2.0P 1 1.35 NT40 × ER50 - 80 80 10 78 M24 × 2.0P 1 2.00 NT50 × ER32 - 75 75 12 50 M16 × 2.0P M24 × 3.0P 或 1” ×W24 1 3.20 NT50 × ER40 - 80 80 12 63 M20 × 2.0P 1 3.40 NT50 × ER50 - 80 80 12 78 M24 × 2.0P 1 3.70 R8 × ER16A - 38 38 102 16 M10 × 1.5P 7/16” NF20 2 0.65 R8 × ER32 - 60 60 102 32 M12 × 1.75P 2 0.90 R8 × ER40 - 65 65 102 40 M16 × 2.0P 2 1.15 DIN 6388 DIN-ISO-10897 PAT NO.M298033 PAT NO.M311791 PAT NO.ZL200620132661.0 ▍特點 Feature 直結式鑽夾頭 DRILL CHUCK INTEGRATED TYPE d1 l1 D T 規格 Spec. l1 D d1 T 重量 (KGS) Weight NT30×SPU13-100 100 49 50 M12 x 1.75P 1.50 NT40×SPU13-90 90 63 50 M16 x 2.0P 1.85 NT50×SPU13-120 120 97.5 50 M24 x 3.0P 3.80 －附扳手 Attaches the spanner.
RkJQdWJsaXNoZXIy ODM5NzM=