DIN 69871 A131 DAT DAT/MLD 直式筒夾銑床夾頭 DAT/MLDMULTI-LOCKMILLING CHUCK PAT NO. M447277 PAT NO. M430337 T l1 d1 d2 - There is a special design for the slots of internal hole. It prevents the cutting tools from slipping and increases the clamping power. - The body of the tool holder is thick, so it has good clamping power. It adopts the needle bearing design to prevent the slipping. The operation is convenient and easy. - After locking the cutting tool (The tolerance of the cutting tool must be less than h6), it is more contacted with the flange while locking the clamping nut and tool holder. It can prevent the bearing cage from deformation easily. Also, rigidity and dust-proof function is improved. - Run-out: Within 0.001~0.005mm. Concentricity: 0.02mm. - MLD20 and MLD-3/4 、MLK20 spanner can be used in common. - MLD25 and EOC25 、MLK25 spanner can be used in common. - MLD32 and MLD-1-1/4 、MLK32 spanner can be used in common. - 內孔特殊溝槽設計，防止所夾持刀具脫刀滑落，可以割斷附著油膜， 不會有脫刀現象產生，提高了使用的安全性 - 刀桿本體厚，可產生充分的夾持力。採用滾針軸承原理設計，滾動磨 擦及脫落減到最小，裝置操作省力便捷 - 螺帽與刀桿端面鎖固後，緊貼牢靠，提高剛性並徹底的防塵 - 偏擺精度 :0.001~0.005 以內，真圓度 :0.02mm - MLD20、MLD-3/4、MLK20 扳手共用 - MLD25、EOC25、MLK25 扳手共用 - MLD32、MLD-1-1/4、MLK32 扳手共用 規格 Spec. l1 d1 d2 T 重量 (KGS) Weight DAT30 x MLD20 - 85 85 20 56.5 M12x1.75P 1.90 DAT30 x MLD20 - 100 100 20 56.5 M12x1.75P 2.10 DAT40 x MLD20 - 85 85 20 56.5 M16x2.0P 2.40 DAT40 x MLD20 - 135 135 20 56.5 M16x2.0P 2.50 DAT40 x MLD32 - 105 105 32 71 M16x2.0P 2.70 DAT40 x MLD32 - 135 135 32 71 M16x2.0P 3.00 DAT50 x MLD20 - 105 105 20 56.5 M24x3.0P 4.50 DAT50 x MLD20 - 150 150 20 56.5 M16x2.0P 4.90 DAT50 x MLD32 - 105 105 32 71 M24x3.0P 5.10 DAT50 x MLD32 - 135 135 32 71 M16x2.0P 5.90 使用 MLD 止水環可使冷卻液從刀具排出，利於散熱及有效排屑 When using MLD sealed cap, the coolantfluid discharges from the cutting tool.It's good for heat dissipation and metal chips removal. 拉頭Pull Stud 筒夾Collet 扳手Spanner 止水端蓋SealedCap A290-A293 A277 A299 A288 ▍特點 Feature ▍選配表 Option
RkJQdWJsaXNoZXIy ODM5NzM=