207_251_UNID_S_2019

T-ONE-S (MFG) TRADING INC. CAT.10000 - JUL. 2019 215 UL429 ISO 9001 Serial No.: 216806 ISO 9001 SOLENOID VALVE Feature ● 2/2 way solenoid valve ● Direct Multiplex-drive, connected diaphragm, conductive and normally closed ● Able to operate directly without pressure ● Normal operating temperature: 80°C in NBR ● Applicable voltage: 110VAC / 220VAC / 24VDC(50/60HZ) ● AC voltage Tolerance: ± 10% DC voltage Tolerance: ± 1% Not Suitable For Fluid of ● Liquid at high temperature, solid when cooled ● Viscosity over 20 cst ● Corrosive fluid Cautions: ● Inner pipe must be clean and tidy before installation ● A Y-Strainer must be installed in front of the solenoid valve to extend life ● Ensure fluid type, voltage, pressure and temperature before installation ● Vertical installation of valve is prohibited Specification mm Model Waterproof Din / flying Lead Coil NASS Din Coil (IP65) Pipe Size Cv Orifice Fluid Operating Pres. Kgf / cm² (Torr) Dimension (mm) Wt. Temp °C Water Air Light Oil Gas Vacuum L H D (Kgs) UV-10 ● ● 3/8" 4.5 15 mm -5°C~80°C 0~10 - ³ 70 100 48 1.01 UV-15 ● ● 1/2" 4.5 15 mm -5°C~80°C 0~10 - ³ 70 100 48 1.00 UV-20 ● ● 3/4" 8.6 20 mm -5°C~80°C 0~10 - ³ 73 102 48 1.13 UV-25 ● ● 1" 12 25 mm -5°C~80°C 0~10 - ³ 100 112 48 1.70 UV-35 ● 1.1/4" 24 35 mm -5°C~80°C 0~10 - ³ 125 113 48 2.32 UV-40 ● 1.1/2" 28 40 mm -5°C~80°C 0~10 - ³ 125 118 48 2.53 UV-50 ● 2" 48 50 mm -5°C~80°C 0~10 - ³ 167 125 48 4.32 Application: Working Fluid Vacuum Working Temp -5°C~80°C Min. Pressure to Open 0 Kgf / cm² Connection BSPT (BS21), NPT (ANSI B2.1) ● Optional coil Waterproof Din Coil, NASS Din Coil. Material: Model UV Valve Body Forged Brass Coil Special Copper Wire (H) Tube ST.ST. Spring ST.ST. Core Needle ST.ST. Plug NBR Diaphragm NBR UV Series UV-10 ~ 50